1.Study both calorimeter (HCAL+EMC) simultaneously on hadron beam.
  For this we need       26x6=14 of an hours                     - 6 days
2.Study HCAL with new H/V base (Cocron Walton divider)           - 3 days.
3.We can to send in CERN  100 HCAL modules. And these modules
  should be tested on hadron beam. We will have done the test
  of 100 modules using setup 5x5=25.
  For this position we need                                     -10 days.
-------------------------------------------------------------------------
  Summary:                                                      - 19 days.                               


> 1. contact person: Oleg.Gavrichtchouk@cern.ch
> 
> 2. type of detector to be tested: HCAL1
> 
> 3. period foreseen for the tests: 19 days
> 
> 4. do you handle with flammable gases (yes, no): no
> 
> 5. longitudinal size of the detector (including frames etc):
>           [cm]: 155 cm
>           [radiation lengths]:
>           [interaction lengths]: 5
> 
> 6. transverse size of the detector [cm]: 100x100 cm
> 
> 7. beam energy [GeV]: 20,40,60,80,100
> 
> 8. beam particles (electrons, hadron, muon): electrons, hadron
> 
> 9. estimated # of events: 2.3*10 in 6 power.
> 
> 10.a) desired rate [particles/spill]: 1000
> 
>    b) maximum tolerable rate [particle/spill]: 1000000 (10 in 6 power)
> 
> 11. independent tracking required (yes, no): yes
> 
> 12. readout electronics: QDC , 12 bit
> 
> 13. estimated amount of rack space for the readout 
>     electronics: 2
> 
> 14. What is the maximum tolerable amount of material 
>     upstream your detector 
>           [radiation lengths]: 0.1-0.2
>           [interaction lengths]: