Minutes from target meeting held on 9th of May 2003 in 888

a) Online registration to the 9th International Workshop on Polarised Solid 
Targets and Techniques taking place in Bad Honnef in October 27 - 29 is now 
possible from Bochum web page:

http://poltarg03.ep1.rub.de/Register.html

The link to the workshop web page:

http://poltarg03.ep1.rub.de/

Deadline for abstracts is June 15 and for proceeding manuscripts December 15.

b) Gerhard and Kaori fine-tuned the Q-meters. First TE-calibration at 1.4 K
gives about 1 % errors to all coils. Sometimes jumps in the baseline data
are seen leading to jumps in the TE area. The deuterium calibration will
be done also at lower temperature of 1.1 K with both positive and negative 
magnet solenoid current. In addition short TE-calibration for 6Li and 7Li 
will be done.

c) Gunter promised to buy a new cell to the oxygen analyser. 

d) The motherboard of pccodt10 monitoring dilution cryostat died on Wednesday
night. Fabrice rented a new PC from CERN and reinstalled all the software.

e) Technical support from EP/TA3 to the magnet was stopped after initial
start up of the system. From now on if there are problems help to the magnet
system has to be negotiated in high level through the COMPASS technical
coordinator.

f) From TCR information about general power failure in the experimental
area will be received to the target coordinator phone.

g) In the dilution cryostat roots pump system a delayed water flow switch
security loop was implemented with the PLC. The roots will stop only if the 
water flow is off more than 60 s. Norihiro asked if a similar system is 
going to be implemented to the magnet PSUs.